Справочник Пользователя для Samsung RM255BABB

1. Dispenser LED Lamp is working with 12V DC.(=Dispenser LED Lamp has 12V DC power supply.) Anyone without approval or other than

the qualified engineer is prohibited to perform the repair or disassembling work due to the danger of high voltage DC current.

2. To replace LED Lamp, the dispenser cover should be disassembled. Anyone without approval or other than the qualified engineer is

prohibited to perform the repair or disassembling work due to the danger of AC voltage applied parts in the dispenser.

Does the dispenser LED 

lamp turn on when pressing 

dispenser ice or water s/w?

Start

Check if ice or water s/w

themselves have a poor contact

when it works intermittently.

Is the Main MICOM No. 

14 low(0V) when pressing ice s/w?

Is the Main MICOM No. 13 low
(0V) when pressing water s/w?

Replace connector, wire and switch.

Is the panel operation normal?

Failure of panel PCB itself

Dispenser Light Assembly itself failure

Replace connector,

wire and switch.

YES

NO

NO

YES

NO

YES

NO

- Check if there is failure on 3P

connector wire and terminal.

- Replace connector and wire.

YES

YES

Does the connector have poor contact?

NO

72

72