Справочник Пользователя для Inglis Home Appliances 2225407

5. There is no need for routine condenser cleaning in normal 

home operating environments. If the environment is 
particularly greasy or dusty, or there is significant pet traffic in 
the home, the condenser should be cleaned every two to 
three months to ensure maximum efficiency.

If you need to clean the condenser:

■

Remove the base grille (see “Base Grille” or “Door 
Removal” section).

■

Use a vacuum with a soft brush to clean the grille, the 
open areas behind the grille and the front surface area of 
the condenser.

■

Replace the base grille when finished.

6. Plug in refrigerator or reconnect power.

NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to 
replace the bulb with one of the same size, shape, and wattage.

1. Unplug refrigerator or disconnect power.

2. Remove the bulb from behind the control panel in the 

refrigerator or from behind the light shield in the freezer (on 
some models). Replace it with an appliance bulb of the same 
wattage.

3. Plug in refrigerator or reconnect power.

If the power will be out for 24 hours or less, keep both refrigerator 
doors closed to help food stay cold and frozen. 

If the power will be out for more than 24 hours, do one of the 
following:

■

Remove all frozen food and store it in a frozen food locker.

■

Place 2 lbs. (907 g) of dry ice in the freezer for every cubic 
foot (28 L) of freezer space. This will keep the food frozen for 
two to four days.

■

If neither a food locker nor dry ice is available, consume or 
can perishable food at once.

REMEMBER: A full freezer stays cold longer than a partially filled 
one. A freezer full of meat stays cold longer than a freezer full of 
baked goods. If you see that food contains ice crystals, it may be 
refrozen, although the quality and flavor may be affected. If the 
condition of the food is poor, dispose of it.

1. Use up any perishables and freeze other items.

2. If your refrigerator has an automatic ice maker:

■

Raise wire shutoff arm to OFF (up) position or move the 
switch to the OFF (right) setting.

■

Shut off water supply to the ice maker.

3. Empty the ice bin.

1. Remove all food from the refrigerator.

2. If your refrigerator has an automatic ice maker:

■

Turn off the water supply to the ice maker at least one day 
ahead of time.

■

When the last load of ice drops, raise the wire shutoff arm 
to the OFF (up) position or move the switch to the OFF 
(right) setting.

3. Depending on your model, turn the Thermostat Control or 

Refrigerator Control to OFF. See the “Using the Control(s)” 
section.

4. Clean refrigerator, wipe it, and dry well.

5. Tape rubber or wood blocks to the tops of both doors to prop 

them open far enough for air to get in. This stops odor and 
mold from building up.

When you are moving your refrigerator to a new home, follow 
these steps to prepare it for the move.

1. If your refrigerator has an automatic ice maker:

■

Turn off the water supply to the ice maker at least one day 
ahead of time.

■

Disconnect the water line from the back of the 
refrigerator.

■

When the last load of ice drops, raise the wire shutoff arm 
to the OFF (up) position or move the switch to the OFF 
(right) setting.

2. Remove all food from the refrigerator and pack all frozen food 

in dry ice.

3. Empty the ice bin.

4. Depending on your model, turn the Thermostat Control or 

Refrigerator Control to OFF. See the “Using the Control(s)” 
section.

5. Unplug the refrigerator.

6. Empty water from the defrost pan.

7. Clean, wipe, and dry thoroughly.

8. Take out all removable parts, wrap them well, and tape them 

together so they don’t shift and rattle during the move.

9. Depending on the model, raise the front of the refrigerator so 

it rolls more easily OR screw in the leveling legs so they don't 
scrape the floor. See the “Door Closing” or “Leveling Your 
Refrigerator” section.

10. Tape the doors shut and the power cord to the refrigerator 

cabinet.

When you get to your new home, put everything back and refer to 
the “Refrigerator Installation” section for preparation instructions. 
Also, if your refrigerator has an automatic ice maker, remember to 
reconnect the water supply to the refrigerator.