Справочник Пользователя для Smeg FD35SNF

Скачать
Страница из 12
UK - 3 -
Installation  and  Switching  On  The Appliance
•  This  appliance is  connecting  to  220-240V and  50  Hz.
•  You  can  offer  help  from  the  service  to  install  and  switching  on  the  appliance  without
any  cost.
•  Before  making  the  connection  to  the  power  supply,  ensure  that  the  voltage  on  the
nameplate  corresponds  to  the  voltage  of  electrical  system  in  your  home.
•  If  the  socket  does  not  match  the  refrigerator  plug,  replace  the  plug  with  a  suitable
one (at least 16 A)
•  Insert the plug into a socket with an efficient  ground connection. If the socket has  no
ground  contact,  we  suggest  you  call  an  electrician  for  assistance.
 Manufacturer is  not responsible  for  failure  to complete the
ground connection as described in this booklet.
•  Do  not  place  the  appliance  in  direct  sunlight.
•  Do  not  use  in  open  air and  shall  not  be  exposed  to  the rain.
•  Place  the  refrigerator  far  from  heat  sources  and  in  a  well-venti-
lated  position.  The  refrigerator  should  be  at  least  50  cm  from
radiators, gas or coal stoves and 5 cm far from electrical stoves.
• Keep the top free  for at least  15 cm.
•  Do  not  place  heavy  and  lots  of things  on the  appliance.
• If the appliance is installed next to another refrigerator or freezer,
observe  a  minimum  distance  of  2  cm  to  prevent  condensation.
•  The  appliance  must  be  stand  firmly  and  level  on  the  floor  Use
the  two  front  levelling-feet  to  compensate  for  an  even  floor.
•  In  order  to  have  air  circulation  under  the  appliance,  the  space
under  the  appliance  must  be  open.  Don’t  close  it  with  carpet  ,
etc.
•  The  outside  of  the  appliance  and  the  accessories  inside  should
be  cleaned  with  a  solution  of  water  and  liquid  soap;  the  inside
of the appliance with sodium  bicarbonate dissolved in lukewarm
water.  After  drying  replace  all  the  accessories.
Before  Switching  On
• Wait after 3 hours before plugging the appliance in to the main power
to  ensure  proper  performance.
• There can  be an odour when you first  switch  on  the appliance. It will
disappear  after  the  appliance  starts  to  cool.
PDF created with pdfFactory Pro trial version