Справочник Пользователя для Behringer MDX1600

2

AUTOCOM PRO-XL MDX1600/COMPOSER PRO-XL MDX2600/MULTICOM PRO-XL MDX4600

This symbol, wherever it appears, alerts you to the

presence of uninsulated dangerous voltage inside

the  enclosure—voltage  that  may  be  sufficient  to

constitute a risk of shock.

This  symbol,  wherever  it  appears,  alerts  you  to

important operating and maintenance instructions

in  the  accompanying  literature.  Please  read  the

manual.

SAFETY INSTRUCTIONS

CAUTION: To reduce the risk of electric shock, do not remove

the  top  cover  (or  the  rear  section).  No  user

serviceable parts inside; refer servicing to qualified

personnel.

WARNING: To reduce the risk of fire or electric shock, do not

expose this appliance to rain and moisture.

DETAILED SAFETY INSTRUCTIONS:

All the safety and operation instructions should be read before

the appliance is operated.
Retain Instructions:

The  safety  and  operating  instructions  should  be  retained  for

future reference.
Heed Warnings:

All warnings on the appliance and in the operating instructions

should be adhered to.
Follow instructions:
All operation and user instructions should be followed.
Water and Moisture:

The  appliance  should  not  be  used  near  water  (e.g.  near  a

bathtub, washbowl, kitchen sink, laundry tub, in a wet basement,

near a swimming pool etc.).
Ventilation:

The appliance should be situated so that its location or position

does  not  interfere  with  its  proper  ventilation.  For  example,  the

appliance should not be placed on a bed, sofa, rug, or similar

surface that may block the ventilation openings, or placed in a

built-in installation, such as a bookcase or cabinet that may impede

the flow of air through the ventilation openings.
Heat:

The appliance should be situated away from heat sources such

as radiators, heat registers, stoves, or other appliances (including

amplifiers) that produce heat.
Power Source:

The appliance should be connected to a power supply only of

the type described in the operating instructions or as marked on

the appliance.
Grounding or Polarization:

This device must be grounded.

Power-Cord Protection:

Power supply cords should be routed so that they are not likely

to be walked on or pinched by items placed upon or against them,

paying particular attention to cords and plugs, extension cords

and the point where they exit from the appliance.
Cleaning:

The appliance should be cleaned only as recommended by the

manufacturer.
Non-use Periods:

The power cord of the appliance should be unplugged from the

outlet when left unused for extended periods of time.
Debris and Liquid Entry:

Care should be taken that debris and/or liquids do not enter the

enclosure through openings.
Damage Requiring Service:

The appliance should be serviced by qualified service personnel

when:
s

The power supply cord or the plug has been damaged; or

s

Debris or liquid has entered the appliance; or

s

The appliance has been exposed to rain; or

s

The  appliance  does  not  appear  to  operate  normally  or

exhibits a noticable change in performance; or

s

The appliance has been dropped, or the enclosure damaged.

Servicing:

The user should not attempt to service the appliance beyond

that  which  is  described  in  the  operating  instructions.  All  other

servicing should be referred to qualified service personnel.