Справочник Пользователя для Frigidaire FGHB2844LF5

18

If the water supply to your refrigerator is softened, be 

sure the softener is properly maintained.  Chemicals 

from a water softener can damage the ice maker.  

NEVER use an ice pick or similar sharp instrument to 

break up the ice. This could damage the ice bin and 

dispenser mechanism.
To loosen stuck ice, use warm water.  Before replacing 

the ice bin, make sure it is completely dry.

When removing or replacing the ice bin, DO NOT 

rotate the auger in the ice bin. If the auger is 

accidentally rotated, you must realign the auger by 

turning it in 90 degree turns (see below) until the ice 

bin fits into place with the drive mechanism. If the 

auger is not properly aligned when replacing the ice 

bin, the refrigerator will produce no ice. The fresh food 

door also may not close properly causing warm air to 

leak into the fresh food compartment. 

  1  Press the CUBES key once to enable cube function.
  2  Press CUBES key a second time to adjust cube size. 

Small is the default.

  3  Use the plus (+) and minus (-) keys to scroll 

through small, medium, and large cube sizes.  

Press the plus (+) key once to select medium ice 

cubes.

  4  Press the plus (+) key again to select large ice 

cubes.

  5  The screen will return to standby mode when 

another function is selected or after 10 seconds of 

no user activity. The display will stay in the CUBES 

function.

 •  If your refrigerator is not connected to a water

supply or the water supply is turned off, turn off the 

ice maker by holding the On/Off soft-touch icon 

and the water shut-off valve for three (3) seconds. 

 •  The following sounds are normal when the ice

maker is operating:

 

-  Motor running    

 

 

 

-  Ice dropping into ice bin  

 

-  Water valve opening or closing

 

-  Running water

 •  When dispensing ice, you will hear a snapping or

clicking sound when the ice chute opens and closes.

 •  If you need a large quantity of ice at one time, it is

best to get cubes directly from the ice bin.

 •  Ice cubes stored too long may develop an odd

flavor. Empty the ice bin as explained below.

 •  When dispensing cubed ice, it is normal to have a small

quantity of little pieces along with the whole cubes.

Clean the ice maker and ice bin 

at regular intervals, especially 

prior to vacation or moving.
  1  Turn off the ice maker.
  2  Remove the ice bin by 

pulling straight out. 

  3  Empty and carefully 

clean the ice bin with 

mild detergent. Do not 

use harsh or abrasive 

cleaners.  Rinse with clear water.

  4  Allow the ice bin to dry completely before replacing 

in the freezer.

  5  Replace the ice bin.  Turn the ice maker on.
Remove and empty the ice bin if:

 •  An extended power failure (one hour or longer)

causes ice cubes in the ice bin to melt and freeze 

together, jamming the dispenser mechanism.

 •  You do not use the ice dispenser frequently. Ice

cubes will freeze together in the bin, jamming the 

dispenser mechanism. 

Remove the ice bin and shake to loosen the cubes or 

clean as explained above.