Справочник Пользователя для GE 162D9617P005

Water Supply to the Icemaker 

You will need to connect the icemaker to a cold

water line.

A water supply kit (containing copper tubing,

shutoff valve, fittings and instructions) is available 

at extra cost from your dealer or from Parts and

Accessories, 800-626-2002. 

Refrigerator Location

Install it on a floor strong enough to support it 

fully loaded.

Clearances

Allow the following clearances for ease of

installation, proper air circulation and plumbing

and electrical connections.

¢ Model

¢ Model

¢ Model

Sides 1/8² (3 mm) 1/8² (3 mm) 1/8² (3 mm)

Top

1² (25 mm)

1/8² (3 mm) 1/8² (3 mm)

Back 1/2² (13 mm) 1/2² (13 mm) 1/2² (13 mm)

If built-in, allow 7/8

² (22 mm) for hinge covers.

If the refrigerator is against a wall on either side,

allow 3/4² (19 mm) for freezer door clearance 

and 3/4² (19 mm) for fresh food door clearance.

The rollers can be adjusted so the refrigerator is

firmly positioned on the floor and does not rock

back and forth.

Rollers allow you to move the refrigerator away

from the wall for cleaning. 

remove the base grille by pulling

it out at the bottom.

Turn the two front roller adjusting screws clockwise
to raise 

the refrigerator, counterclockwise to lower

it. Use a 3/8² socket wrench, adjustable wrench or

pliers.

Built-In Style models also have rear adjustable

rollers so you can align the refrigerator with your

kitchen cabinets. Use a 5/16² socket wrench to turn

the screws for the rear rollers—clockwise to raise it,
counterclockwise to lower it.

19

Front Roller 
Adjusting Screw

Rear Roller Adjusting Screw 
(on Built-In Style models only).
Use this screw if the refrigerator
has one.

Rear Roller Adjusting Screw 
(on Built-In Style models only).
Use this screw if the refrigerator
does not have the screw pictured
to the left.

Front Roller 
Adjusting Screw