Справочник Пользователя для Franklin Industries, L.L.C. FCR36OD

Скачать
Страница из 25
7
 
Operating Your Refrigerator
IMPORTANT: Do not plug in the unit for at least 24 hours after unit is set in
place. Failure to do so may result in the unit working improperly.
This  refrigerator/beverage  cooler  has  a  rotary  temperature  control  knob
(thermostat) marked with the settings COLD23456COLDEST in order of
increasing coldness. In addition, this model employs a heater inside the cabinet,
and is designed for outdoor use.  When the temperature is colder than the tem-
Note: To prevent excessive strain on the compressor, do not leave the
unit at the COLDEST setting for more than an hour at a time.
OPERATING INSTRUCTIONS
Turning on the Unit
The refrigerator turns on automatically when it is plugged in.
Note: If you unplug the refrigerator or the power is cut off accidentally,
allow 8 minutes before restarting it or plugging it back in. It will not
operate properly in less than 8 minutes.
Temperature Setting
Initially set the thermostat to setting 4. The compressor will run continuously for a
few  hours  and  only  after  the  temperature  inside  the  appliance  becomes  stable
will the compressor run normally (i.e., turn on and off periodically).
When the unit is operated for the first time, it is suggested that you not put foods
in until the compressor is running normally.
Adjusting  the  thermostat  counter-clockwise  will  make  the  compressor  run  for  a
longer time with a shorter compressor stop time, and the temperature inside the
appliance will be colder.  The  setting should be regulated according to ambient
conditions and the desired temperature. The compressor will run for a while after
each regulation before reaching a steady temperature.
Please note: 
Cold air falls and warmer air rises, and there will be a small
temperature  variation  from  the  bottom  of  the  unit  to  the  top.  The
temperature at the bottom of the unit will always be slightly colder.