Справочник Пользователя для Mitsubishi Electronics 1995SL
3
3
Unpacking the Monitor
Please check that the following items are included with your monitor. If they
are missing or damaged, please contact your place of purchase immediately.
are missing or damaged, please contact your place of purchase immediately.
♦
Monitor with attached signal cable
♦
Power cord
♦
User’s manual
Locate the model name and the serial number label on the back of your
monitor and write the details of the monitor and your place of purchase in the
space on page (ii) of this manual for future reference.
monitor and write the details of the monitor and your place of purchase in the
space on page (ii) of this manual for future reference.
4
Installation
Your monitor is equipped with an automatic power supply with a voltage
range from 100 to 240 Volts AC at a frequency of 50 to 60 Hz.
range from 100 to 240 Volts AC at a frequency of 50 to 60 Hz.
To install your Diamond View 1995SL monitor:
1. Make sure that the computer
system’s power is turned off.
2. Connect the power cord to the
monitor and attach it to a power
socket.
socket.