Справочник Пользователя для Frigidaire FGEF306TMF

24

When your Oven Sabbath feature is ON, the Electronic 

Surface Elements are also in Sabbath mode. This means 

that all electronic surface element control displays show 

“Sb”. The surface elements can be used even if the 

Sabbath Feature is on.
To turn ON a Surface Element when the Oven 

If you turn on a surface element when the oven Sabbath 

feature is on, the electronic surface element control will 

record that request and execute it with a 15-30 seconds 

delay. So the element will start heating 15-30 seconds 

after the surface element control was turned on. As the 

oven control, the surface element display will not show the 

setting because “Sb” is on in the displays. When necessary, 

it is possible to adjust the power of the surface element but 

you have to remember that the surface element control will 

adjust the temperature with the same delay.
To turn OFF the Surface Element when the Oven 

To shut off the surface element while the Sabbath feature 

is ON, proceed as usual but take note that the element will 

immediately turn off without any delay.

SETTING THE SABBATH FEATURE 

(for use on 

the Jewish Sabbath & Holidays)
The BAKE TIME and DELAY START pads are used to 

set the Sabbath feature. The Sabbath feature may only be 

used with the BAKE pad. The oven temperature may be 

set higher or lower after setting the Sabbath feature (the 

oven temperature adjustment feature should be used only 

during Jewish Holidays), however the display will not visibly 

show or provide any audible tones indicating whether the 

change occurred correctly. Once the oven is properly set 

using Bake with the Sabbath feature active, the oven will 

remain continuously ON until cancelled. This will override 

the factory preset 6-Hour Energy Saving feature.

If the oven light will be needed during the Sabbath, press 

OVEN LIGHT   before activating the Sabbath feature. 

Once the oven light is turned ON and the Sabbath feature 

is active, the oven light will remain ON until the Sabbath 

feature is turned OFF. If the oven light needs to be OFF, 

be sure to turn the oven light OFF before activating the 

Sabbath feature.

activate the Sabbath feature (example: baking at 350°F)

1. Be sure that the clock is set with the correct time of day.

2. Place the food in the oven.

3. Press UPPER OVEN or LOWER OVEN to select oven.

4. Press BAKE. “350°” appears in the display.

5. Press START. The actual oven temperature appears in 

the display.

6. If you desire to set the oven control for a Bake Time or 

Delayed Bake Time do so at this time. If not, skip this 

step and continue to step 8. Refer to the Bake Time / 

Delay Start section for complete instructions. Remember 

the oven will shut down after using Bake Time or Delay 

Start and therefore may only be used once during the 

Sabbath/Jewish Holidays. The maximum Delayed Start 

Bake time is 11 hours & 59 minutes.

7. The oven will turn ON and begin heating.

8. Press and hold both the BAKE TIME and DELAY START 

pads for at least 3 seconds. “SAb” will appear in the 

display. Once “SAb” appears in the display the oven 

control will no longer beep or display any further changes 

and the oven is properly set for the Sabbath feature.

9. The oven may be turned OFF at any time by fi rst pressing 

CANCEL pad (this will turn the oven OFF only). To turn 

OFF the Sabbath feature press and hold both the BAKE 

TIME and DELAY START pads for at least 3 seconds. 

“SAb” will disappear from the display.

It is not advised to attempt to activate any other program 

feature other than BAKE while the Sabbath feature is 

active. ONLY the following key pads will function after 

setting the Sabbath feature; 0 to 9, BAKE, START & 

CANCEL. All other keypads should not be used once 

the Sabbath feature is properly activated.

Í

You may change the oven temperature once baking has 

started by pressing BAKE, the numeric key pads for the 

temperature you want (example for 425°F press 4 2 5) 

and then pressing START  twice (for Jewish Holidays 

only). Remember that the oven control will no longer 

beep or display any further changes once the oven 

is set for the Sabbath feature.

Should you experience a power failure or interruption, 

the oven will shut off. When power is returned, “SF” 

(Sabbath Failure) will be shown in the oven display and the 

cooktop displays. The oven and cooktop will not turn back 

on automatically. If your food was nearly fully cooked, 

you may allow the trapped heat in the oven to fi nish the 

cooking process. Otherwise, you should remove the food 

when the power failure occurs, because you may only start 

the oven once during the Sabbath/Jewish Holidays. After 

the Sabbath observance turn OFF the Sabbath feature and 

the oven may be used with all normal functions.
After the Sabbath observance turn OFF the Sabbath 

feature. Press and hold both the BAKE TIME and DELAY 

pads for at least 3 seconds. “SAb” will disappear from 

the display and the oven may be used with all normal 

functions. For further assistance, guidelines for proper 

usage, and a complete list of models with the Sabbath 

feature, please visit the web at http:\\www.star-k.org.