Справочник Пользователя для Frigidaire FGEF306TMF

Скачать
Страница из 36
27
Í
NOTE
The surface elements and the 2nd oven cannot be activated 
when the Self-Clean feature is active (see the section: The 
electronic surface element control (ESEC)).
SELF-CLEANING
Í
NOTE
If a 2 or 4 hour clean time is desired, press SELF CLEAN 
multiple times to toggle between 2, 3 or 4 hours.
Í
NOTE
If a 2 or 4 hour clean time is desired, press SELF CLEAN 
multiple times to toggle between 2, 3 or 4 hours.
Í
NOTE
Allow about 15 seconds for the oven door lock to close.
SETTING SELF-CLEAN CYCLE TIME LENGTH
The SELF CLEAN pad controls the Self-Cleaning feature. 
If you are planning to use the oven directly after a self-
clean cycle remember to allow time for the oven to cool 
down and the oven door to unlock. This normally takes 
about one hour. So a 3 hour self-clean cycle will actually 
take about 4 hours to complete.
*It is recommend to use a 2 hour self-clean cycle for 
light soils, a 3 hour cycle for average soils, and a 
4 hour cycle for heavy soils (to assure satisfactory 
results).
To set the controls for a 3 hour Self-Cleaning cycle 
to start immediately and shut off automatically
1.  Be sure the clock is set with the correct time of day and 
the oven door is closed.
2. Press 
UPPER or LOWER to select oven. 
3. Press 
SELF CLEAN“3:00” and CLn will show in the 
display. The control will automatically clean for a 3 hour 
period (default self-cleaning cycle time). For the fi rst 
10 seconds, “Remove Racks” will fl ash and beep to 
remind you that the racks need to be removed.
The SELF CLEAN and DELAY START pads controls the 
Delayed Self-Clean operation. The automatic timer will turn 
the oven on and off at the time you select in advance.
To set the control for the Self-Cleaning Cycle to 
start at a delayed time and shut off automatically 
(example: 3 hour self-clean cycle to start at 4:30)
1.  Be sure the clock is set with the correct time of day 
and the oven door is closed.
2. Press 
UPPER or LOWER to select oven. 
3. Press 
SELF CLEAN“3:00” and CLn will show in 
the display. The control will automatically clean for 
a 3 hour period. For the fi rst 10 seconds, “Remove 
Racks” will fl ash and beep to remind you that the 
racks need to be removed.
4. Press 
START. The “DOOR” icon will fl ash.
5.  As soon as the control is set, the motor driven oven 
door lock will begin to close automatically. Once the 
door has been locked the “DOOR” indicator light will 
quit fl ashing and remain on and the   icon will appear. 
6. Press 
DELAY START. Enter the desired start time 
using the number pads 4 3 0.
7. Press 
START. “DELAY”, “DOOR LOCKED” and 
CLEAN” icons will remain on.
8.  The control will start the self-cleaning at the set start 
time, for the period of time previously selected. At 
that time, the icon “DELAY” will go out; “CLn” and 
oven icon will appear in the display.
When the Self-Clean Cycle is Completed
1. “HOT” will appear in the display. The time of day, the 
DOOR” and   icon will remain in the display.
2.  Once the oven has cooled down for approximately 1 
HOUR, and the “DOOR” is no longer displayed, the 
oven door can then be opened.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-
cleaning cycle due to excessive smoke or fi re in the oven:
1. Press 
CANCEL.
2.  The oven door can only be opened after the oven 
has cooled down for approximately 1 HOUR and the 
DOOR” and   icons are no longer displayed.
4. Press 
START. The “DOOR” icon will fl ash.
5.  As soon as the control is set, the motor driven oven 
door lock will begin to close automatically. Once the 
door has been locked the “DOOR” indicator light will 
stop fl ashing and remain on and the   icon will appear. 
Also, the oven icon will appear in the display.
When the Self-Clean Cycle is Completed
1. “HOT” will appear in the display. The time of day, the 
DOOR” and   icon will remain in the display.
2.  Once the oven has cooled down for approximately 1 
HOUR, and the “DOOR” is no longer displayed, the 
oven door can then be opened.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning 
cycle due to excessive smoke or fi re in the oven:
1. Press 
CANCEL.
2.  The oven door can only be opened after the oven has 
cooled down for approximately 1 HOUR and the “DOOR” 
and   icons are no longer displayed.