Справочник Пользователя для Lexmark C762
![Lexmark](https://files.manualsbrain.com/attachments/878cae5fca737841ce37f41a7ee73881a8b54f60/common/fit/150/50/823435a5b9c868f91a4b7f8b99ddfd9b9c699edf1f6ff104003e82a92d7f/brand_logo.png)
Interfaces
8-18
SLCTIN* Receiver for the Lexmark T640x
The following diagram illustrates the SLCTIN* receiver for the Lexmark T640x.
Serial Interface
The serial interface allows data to flow back and forth between the computer and the
printer. However, the serial interface transfers data at a slower rate than the parallel
interface.
printer. However, the serial interface transfers data at a slower rate than the parallel
interface.
If a serial connector is required, you may be able to install an RS-232C Serial Interface
Card, an External Serial Adapter, or an RS-232C Serial/Parallel 1284-C Interface
Card. See your printer documentation for more information.
Card, an External Serial Adapter, or an RS-232C Serial/Parallel 1284-C Interface
Card. See your printer documentation for more information.
Use RS-232C serial interface if the printer is more than 3.04 m (10 ft) from the
computer but less than 15.24 m (50 ft) away. (You can also use a 6.1 m (20 ft) Lexmark
cable to connect a printer and a computer located up to 20 feet apart.)
computer but less than 15.24 m (50 ft) away. (You can also use a 6.1 m (20 ft) Lexmark
cable to connect a printer and a computer located up to 20 feet apart.)
When using the serial interface, your printer has the following differences from the
serial interface on some other printers:
serial interface on some other printers:
•
The printer returns XON/XOFF with 2 stop bits in all cases.
•
The printer does not support DTR inversion.
Using the RS-232C Serial Interface
This section describes how to use the RS-232C serial interface.
Connector
Pin
39 ohm ±10%
GND
74LVC161284
1500 pF±20%