Инструкции По Установке для Toshiba HV6FS-MLD

    

 

 

 
STORAGE 

 
If the circuit breaker is to be stored for any length 
of time prior to installation, the following 
precautions should be taken: 

 
1)  The original packing should be restored, if 

possible. 

 
2)  Do not subject the equipment to moisture or 

sun rays.  Store in cool, clean, and dry 
location. 

 
3)  Place a dust cover over the circuit breaker 

packaging to protect against dirt and 
moisture. 

 
4)  Store in an upright position. 
 
INSPECTION DURING STORAGE 

 
Routine scheduled inspection is necessary if 
storage is for an extended period. The unit 
should be checked for condensation, moisture, 
corrosion, and vermin. 
 
Prior to installation, the circuit breaker should be 
carefully examined for evidence of physical 
damage, corrosion, or other deterioration.   Refer 
to the PRE-ENERGIZATION Section of this 
manual. 
 
The MAINTENANCE section of this manual 
describes various types of inspections 
recommended for this circuit breaker during the 
operation 

period.                        

 

 
 
 
 
 

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net