Справочник Пользователя для Siemens SITRANS FUS1010 NEMA-4X/ IP 65

                 1-18

The meter is now ready to report flow. Press           . The meter will then ask you to save the Site.
Saving the Site is optional and will therefore be covered in paragraph 1.7.  To abort this item,
press         . This brings up a Flow Display Screen.

Once your site has successfully installed, you can press                  to scroll between the avail-
able display screens.

Now that you are familiar with the 1010N setup, take the time to read the information about the Installa-
tion Menu in Section 2. Becoming acquainted  with the various flowmeter setups in the Main Menu will
help further your understanding of  the 1010N.

Upon completion, the meter reports the measured liquid sonic velocity.  Press           . The flowmeter will
then automatically perform an AutoZero operation, where the meter measures any zero flow offset,
which is used to correct the flow reading.  This operation occurs only when the transducers are mounted
in the reflect configuration and is independent of whether or not the liquid is flowing.

After the AutoZero operation is complete, the meter may ask you to register the transducer used in this

installation.  It is advisable that you register your transducers, since the registration list is used to
condition the transducer recommendation.

Press        and select [YES], or [NO] if you do not want to register this transducer and then,
press         .

0.20