Справочник Пользователя для Lucent Technologies 5
MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
System Manager’s Guide
555-650-118
Issue 1
June 1997
Managing the System
Page 6-67
Connecting Auxiliary Equipment
6
For Voice Messaging System and Automated Attendant
The number of rings cannot be programmed for individual voice messaging
systems; the single setting applies for all. Use the Group Type procedure in
“Optional Group Features” (Chapter 3,
systems; the single setting applies for all. Use the Group Type procedure in
“Optional Group Features” (Chapter 3,
System Programming
) to assign VMI ports
as either integrated or generic.
Valid Entries
Touch-tone duration: 50 to 200 ms, in increments of 25 ms
Interval between digits: 50 to 200 ms, in increments of 25 ms
Number of rings before transfer: 0 to 9
Interval between digits: 50 to 200 ms, in increments of 25 ms
Number of rings before transfer: 0 to 9
Task List: Connecting Auxiliary Equipment
6
o
Obtain Form 2c, System Numbering: Line/Trunk Jacks, and the
appropriate individual telephone form (4d, 4e, 4f, 5b, or 5c). For a voice
messaging system or auto attendant system, see the forms packaged with
the application.
appropriate individual telephone form (4d, 4e, 4f, 5b, or 5c). For a voice
messaging system or auto attendant system, see the forms packaged with
the application.
o
If necessary, read “Auxiliary Equipment” in
System Programming
, Chapter
4, for additional information.
o
Plan changes using the planning guidelines above; record the new values
on the form(s).
on the form(s).
o
Open the System Programming menu from the console or a PC with SPM.
o
Program the change(s), following the appropriate instructions for “Auxiliary
Equipment” in
Equipment” in
System Programming
, Chapter 4, or the appropriate
summary programming instructions below.
NOTE:
For Music On Hold and maintenance alarms, System Idle is
required; for loudspeaker paging, Line/Trunk Idle is required.
required; for loudspeaker paging, Line/Trunk Idle is required.
o
When you have finished, file the form(s) with the rest of the planning forms.
Programming Instructions
6
For fax machines:
Console Procedure
AuxEquip
→
Fax
→
Extension
→
Dial ext.
no.
→
Enter
→
Exit
→
Msg Waiting
→
Dial fax machine
ext. no.
→
Enter
→
Dial message waiting indicator ext.
no.
→
Enter
→
Threshold
→
Drop
→
Dial no. of
seconds
→
Enter
→
Exit
→
Exit
PC Procedure
→
→
→
Type ext. no.
→
→
→
→
Type fax machine ext. no.
→
→
Type message
waiting indicator ext. no.
→
→
→
!
+
0
→
Type
no. of seconds
→
→
→