Справочник Пользователя для Pelco CM9700MDD-EVS

10

C1570M-C (5/06)

The following steps provide an overview of how to install the CM9700MDD-EVS: 

1. Install all components of the matrix switching system. Refer to the matrix system documentation for instructions.

2. Install one or more CM9700MDD-EVS units, and then make the following connections:

a.

Connect the CM9700MDD-EVS to the CM9700-CC1.

b.

Connect the video output connector on the CM9700MDD-EVS to a video input connector on the matrix bay (CM9760-MXB, 
CM9770-MXB, or CM9780-MXB).

c.

Connect the CM9700MDD-EVS to the network. Instructions on installing the CM9700MDD-EVS are provided in subsequent sections.

3. Install all components of the Endura system and connect all components to the network. Refer to the Endura system documentation for 

instructions on installing Endura components. 

Once the hardware installation and all device connections are completed, you must add the CM9700MDD-EVS to the 9700 matrix system 
configuration. Refer to the Software Configuration section for instructions.

Since Endura is a network system that requires a continuous amount of bandwidth to transmit live video, always include your network 
administrator when planning and installing Endura components.

You will need the following:

Pelco-approved Endura certification

Pelco-approved Matrix System certification

1 CM9700MDD-EVS

1

16-pin terminal block

1 

4-pin to 2-pin power adapter

1

Pelco badge rotation sticker

NOTE: Since power requirements vary by installation, an individual power supply is not included with the CM9700MDD-EVS. You can purchase 
either the NET5301PS single unit power supply or the RK5000PS-5U rack mount, which includes a power supply. Refer to the Power Connection 
section for more information.

In addition to the standard tools and cables required for a video security installation, you will need to provide the following items:

1 

Cat5e (or better) cable with an RJ-45 connector at one end and with the individual wires exposed at the other end (for 
connecting the CM9700MDD-EVS to the CM9700-CC1)

1

Power supply; refer to the Power Connection section for more information

1

Small flat-tip screwdriver