Справочник Пользователя для Pelco CM9700MDD-EVS
C1570M-C (5/06)
25
Software Configuration
Once the hardware installation and all device connections are completed, you will need to complete the following software configuration tasks:
•
Use the CM9700-MGR software to add the CM9700MDD-EVS and Endura cameras to the matrix system configuration. Instructions are
provided in the Add the CM9700MDD-EVS and Endura Cameras to the 9700 Matrix Configuration section. When you assign the logical
camera numbers to the Endura cameras, be sure to match the logical camera numbers assigned through the WS5000 application. Use the
CM9700 Resource CD to install the CM9700-MGR software.
provided in the Add the CM9700MDD-EVS and Endura Cameras to the 9700 Matrix Configuration section. When you assign the logical
camera numbers to the Endura cameras, be sure to match the logical camera numbers assigned through the WS5000 application. Use the
CM9700 Resource CD to install the CM9700-MGR software.
•
Export the CM9700-MGR configuration files and transfer them to the CM9700-CC1. Refer to the Export the Configuration Files and Transfer
the Data to the CM9700MDD-EVS section.
the Data to the CM9700MDD-EVS section.
•
Use the Endura WS5000 application to assign logical camera numbers to each camera in the Endura system that you want to view from the
matrix system. Remember that these cameras must be identified with the same logical camera numbers in the CM9700-MGR application
and the WS5000 application. Refer to the WS5000 Operation manual and the Endura Resource CD for instructions on configuring cameras
in the Endura system.
matrix system. Remember that these cameras must be identified with the same logical camera numbers in the CM9700-MGR application
and the WS5000 application. Refer to the WS5000 Operation manual and the Endura Resource CD for instructions on configuring cameras
in the Endura system.
•
(Optional) Modify the CM9700MDD-EVS configuration settings through the Endura WS5000 application. When you apply power to the unit
and connect the network cable, the Endura system manager registers the CM9700MDD-EVS as an Endura device and creates a basic
configuration. To modify this basic Endura configuration, refer to the WS5000 Operation manual and the Endura Resource CD for
instructions. Some settings that you may want to configure include the time format (configure the WS5000 Time Standard setting and the
video format (NTSC or PAL; configure the WS5000 Type setting).
and connect the network cable, the Endura system manager registers the CM9700MDD-EVS as an Endura device and creates a basic
configuration. To modify this basic Endura configuration, refer to the WS5000 Operation manual and the Endura Resource CD for
instructions. Some settings that you may want to configure include the time format (configure the WS5000 Time Standard setting and the
video format (NTSC or PAL; configure the WS5000 Type setting).
ADDITIONAL OPTIONAL CONFIGURATION
Alarm Configuration
You can configure the matrix system to receive alarms from the Endura system for monitoring and action within the matrix system.
Endura system alarms can be any of the following types:
•
Contact alarms
•
Motion alarms
Endura system alarms are received by the CM9700 system as soft alarms and can be viewed on the CM9760-KBD matrix system keyboard.
Refer to the Configure a CM9700 Soft Alarm to Represent an Endura Alarm section for instructions.
Refer to the Configure a CM9700 Soft Alarm to Represent an Endura Alarm section for instructions.
Macro Configuration
You can configure macros in the CM9700 matrix system to activate scripts in the Endura system. Refer to the Macro Configuration section.
Network Video Recorder Configuration
You can configure the matrix system and the CM9700MDD-EVS for Network Video Recorder (NVR) management. Refer to the Network Video
Recorder Management section.
Recorder Management section.