Справочник Пользователя для Siemens RL-854
RL-854 Radio Control Unit
Type I, Style A
Type I, Style A
Description
2001 Siemens Airfield Solutions, Incorporated
96A0027L
Page 6
All rights reserved
Issued 5/01
The Radio Control has three output relays operated by keying the
transmitter in specific sequences. To power these relays, pilots can set their
communications transmitters to the frequency to which the RL-854 is tuned.
transmitter in specific sequences. To power these relays, pilots can set their
communications transmitters to the frequency to which the RL-854 is tuned.
Three clicks of the mike button within five seconds powers the lighting
system on the low brightness setting. Five clicks of the mike button within
five seconds powers the lighting system on the medium brightness setting.
Seven clicks of the mike button within five seconds powers the lighting
system on the high brightness setting. The RL-854 Radio Control can be
field programmed for three, five, and seven clicks to change the light
settings.
system on the low brightness setting. Five clicks of the mike button within
five seconds powers the lighting system on the medium brightness setting.
Seven clicks of the mike button within five seconds powers the lighting
system on the high brightness setting. The RL-854 Radio Control can be
field programmed for three, five, and seven clicks to change the light
settings.
The contacts of the relays in the RL-854 are for control purposes only.
They are rated 10 amps (inductive) and are capable of operating the coils or
power relays. They are not intended to switch lighting-load currents.
They are rated 10 amps (inductive) and are capable of operating the coils or
power relays. They are not intended to switch lighting-load currents.
Two options are available for the RL-854 Radio Control Unit: radio
controller power handling capability and heater.
controller power handling capability and heater.
Radio Controller Power Handling Capability
An option is available to provide for power handling capability in the Radio
Controller, changing the designation to RL-854PR. It adds three 2-pole
relays with contact ratings of 25 amps per pole. These power relays are
powered by the control relays. Contacts of the power relays are terminated
in a terminal block.
Controller, changing the designation to RL-854PR. It adds three 2-pole
relays with contact ratings of 25 amps per pole. These power relays are
powered by the control relays. Contacts of the power relays are terminated
in a terminal block.
The entire Radio Controller is completely solid state and has no moving
parts other than the relays.
parts other than the relays.
Heater
A heater is available as an option for the RL-854 Radio Control Unit.
Thermostat TH1 in the unit is used to supply the heater with 120 Vac when
the outside air temperature drops below 0 °F. This prevents the receiver
PCB from freezing.
Thermostat TH1 in the unit is used to supply the heater with 120 Vac when
the outside air temperature drops below 0 °F. This prevents the receiver
PCB from freezing.
Introduction
(contd.)
Options