Справочник Пользователя для DELL 34XX
Parameter
Description
warningThreshold
The percentage of storage capacity at which you
receive a warning alert that the disk pool is nearing
full capacity. Use integer values. For example, a
value of 60 means 60 percent. The default value is
50.
Setting this parameter to 0 disables warning alerts.
receive a warning alert that the disk pool is nearing
full capacity. Use integer values. For example, a
value of 60 means 60 percent. The default value is
50.
Setting this parameter to 0 disables warning alerts.
If you set this to default, the warning alert
threshold value is determined by the RAID
controller module firmware.
criticalPriority
The default value is highest.
backgroundPriority
The default value is low.
securityType
The setting to specify the security level when
creating the disk pool. All virtual disk candidates for
the disk pool have the specified security type.
These settings are valid:
• none—The virtual disk candidates are not
creating the disk pool. All virtual disk candidates for
the disk pool have the specified security type.
These settings are valid:
• none—The virtual disk candidates are not
secure.
• capable—The virtual disk candidates are
capable of having security set, but security has
not been enabled.
• enabled—The virtual disk candidates have
security enabled.
The default value is none.
physicalDiskMediaType
You must use this parameter when you have more
than one type of physical disk media in your
storage array.
Valid physical disk media are:
• hdd—Use this option when you have hard disk
than one type of physical disk media in your
storage array.
Valid physical disk media are:
• hdd—Use this option when you have hard disk
drives.
• ssd—Use this option when you have solid state
disks.
• unknown—Use this option if you are not sure
what types of physical disk media are in the
expansion enclosure.
• allMedia—Use this option when you want to
use all types of physical disk media that are in
the expansion enclosure.
The default value is hdd.
userLabel
The name that you want to give the new disk pool.
Enclose the disk pool name in double quotation
marks (" ").
Enclose the disk pool name in double quotation
marks (" ").
degradedPriority
The priority for degraded activities on the disk
pool. For example, disk pool reconstruction after
one physical disk failures.
167