Справочник Пользователя для DELL 34XX

Parameters

Parameter

Description

primary

The name of an existing virtual disk on the local 
storage array that you want to use for the primary 
virtual disk. Enclose the primary virtual disk name in 
double quotation marks (“ ”).

secondary

The name of an existing virtual disk on the remote 
storage array that you want to use for the 
secondary virtual disk. Enclose the secondary 
virtual disk name in double quotation marks (“ ”).

remoteStorageArrayName

The name of the remote storage array. Enclose the 
remote storage array name in double quotation 
marks (“ ”).

remoteStorageArrayWwn

The World Wide Identifier (WWID) of the remote 
storage array. Enclose the WWID in double 
quotation marks (“ ”).

remotePassword

The password for the remote storage array. Use 
this parameter when the remote storage array is 
password protected. Enclose the password in 
double quotation marks (“ ”).

syncPriority

The priority that full synchronization has relative to 
host I/O activity. Valid values are highest, high, 
medium, low, or lowest.

autoResync

The settings for automatic resynchronization 
between the primary virtual disks and the 
secondary virtual disks of a remote replication pair. 
This parameter has these values:
• enabled—Automatic resynchronization is 

turned on. You do not need to do anything 

further to resynchronize the primary virtual disk 

and the secondary virtual disk.

• disabled—Automatic resynchronization is 

turned off. To resynchronize the primary virtual 

disk and the secondary virtual disk, you must 

run the start asyncReplicationGroup 

command.

writeOrder

The write order for data transmission between the 
primary virtual disk and the secondary virtual disk. 
Valid values are preserved or notPreserved.

writeMode

How the primary virtual disk writes to the 
secondary virtual disk. Valid values are 
synchronous or asynchronous.

183