Справочник Пользователя для Furuno SC-50
2. INSTALLATION
2-14
2.4
Installing the Display Unit
2.4.1
Desktop, overhead mounting
1. Fasten the hanger to the mounting location with four tapping screws
(supplied). See the outline drawing for mounting dimensions.
2. Screw the knobs into the display unit.
3. Set display unit to the hanger and tighten the knobs.
4. Run the ground wire between the ground terminal on the display unit and the
3. Set display unit to the hanger and tighten the knobs.
4. Run the ground wire between the ground terminal on the display unit and the
ship’s superstructure.
Desktop
Overhead
Display unit mounting methods
2.4.2 Flush
mount
Two types of flush mounts are available. See the outline drawing at the back of
the manual for details.
Flush mount “F”
the manual for details.
Flush mount “F”
Flush mount “F” kit Type: OP20-29, Code No: 000-041-405)
Name Type
Code
No.
Qty
Cosmetic Panel
20-016-1051
100-251-370
1
Tapping Screw
5X20
000-802-840
4
Hex Bolt
M6X12
000-862-127
2
Spring Washer
M6
000-864-260
2
1. Make a cutout in the mounting location. The dimensions are 183(W) x 92(H)
mm.
2. Fasten the cosmetic panel to the display unit with hex bolts and spring
washers.
3. Fasten the display unit to the mounting location with tapping screws.