Справочник Пользователя для Mitsubishi Electronics FR-D740-012

4.1.3

Easy operation mode setting (easy setting mode)

Setting of Pr. 79 Operation mode selection according to combination of the start command and speed command can be
easily made.

Changing
example

Start command: external (STF/STR), frequency command: operate with

Operation Display

Screen at powering on
The monitor display appears.

Press and for

0.5s.

Turn

until

appears.

(refer to the table below for other settings)

Press

to set.

Flicker ··· Parameter setting complete!!

The monitor display appears after 3s.

REMARKS

is displayed ... Why?

Parameter write is disabled with "1" set in Pr. 77.

is displayed ... Why?

Setting can not be made during operation. Turn the start switch (

, STF or STR) off.

Press

before pressing

to return to the monitor display without setting. In this case, the mode changes to external

operation mode when performed in the PU operation mode (PU JOG operation mode) and to PU operation mode when

performed in the external operation mode.

Reset can be made with

The priorities of the frequency commands when Pr. 79 = "3" are "Multi-speed operation (RL/RM/RH/REX) > PID control (X14) >

terminal 4 analog input (AU) > digital input from the operation panel".

Flickering

Operation Panel Indication

Operation Method

Start command

Frequency command

External

(STF, STR)

Analog

voltage input

External

(STF, STR)

Analog

voltage input

Flickering