Справочник Пользователя для Mitsubishi Electronics FR-A720-0.4k to 90k
400
Check and clear of the faults history
(2) Clearing procedure
POINT
· The faults history can be cleared by setting "1" in Er.CL Faults history clear.
Operation
1.
Screen at power-ON
The monitor display appears.
2.
Parameter setting mode
Press
to choose the parameter setting mode.
(The parameter number previously read appears.)
3.
Selecting the parameter number
Turn
until "
" (faults history clear) appears.
Press
to read the present set value. "
" (initial value) appears.
4.
Faults history clear
Turn
to change it to the set value " ". Press
to set.
"
" and "
" flicker alternately after the faults history is cleared.
·By turning
, you can read another parameter.
·Press
to show the setting again.
·
Press
twice to show the next parameter.