Справочник Пользователя для Mitsubishi Electronics FR-A701

Always run the inverter in a clean status.
When cleaning the inverter, gently wipe dirty areas with a soft cloth immersed in neutral detergent or ethanol.

The inverter consists of many electronic parts such as semiconductor devices.
The following parts may deteriorate with age because of their structures or physical characteristics, leading to reduced
performance or fault of the inverter. For preventive maintenance, the parts must be replaced periodically.
Use the life check function as a guidance of parts replacement.

*1 Estimated lifespan for when the yearly average surrounding air temperature is 40°C

(without corrosive gas, flammable gas, oil mist, dust and dirt etc)

*2 Output current : 80% of the inverter rated current 

Do not use solvent, such as acetone, benzene, toluene and alcohol, as they will cause the inverter surface paint to peel off.
The display, etc. of the operation panel (FR-DU07) and parameter unit (FR-PU04/FR-PU07) are vulnerable to detergent and
alcohol. Therefore, avoid using them for cleaning.

Cooling fan

10 years

Replace (as required)

Main circuit smoothing capacitor

10 years 

Replace (as required)

On-board smoothing capacitor

10 years

Replace the board (as required)

Relays

−

as required

·

Since repeated inrush currents at power ON will shorten the life of the converter circuit, frequent starts and stops of the
magnetic contactor must be avoided.

For parts replacement, consult the nearest Mitsubishi FA Center.