Справочник Пользователя для Mitsubishi Electronics FR-A701

Before operation

* Depends on the Pr. 21 Acceleration/deceleration time increments setting. The initial value for the setting range is "0 to 3600s" and setting increments is

"0.1s".

Set in Pr. 7 Acceleration time a larger value for a slower speed increase and a smaller value for a faster speed increase.
Set in Pr. 8 Deceleration time a larger value for a slower speed decrease and a smaller value for a faster speed decrease.

7.5K or lower

5s

0 to 3600/360s 

*

Set the motor acceleration time.

11K or higher

15s

7.5K or lower

5s

0 to 3600/360s 

*

Set the motor deceleration time.

11K or higher

15

Changing example

Change  the  Pr. 7 Acceleration time setting from "5s" to
"10s".

Running 
frequency

Acceleration 
time

Deceleration 
time

Time

Output 

frequency 

(Hz)

(60Hz)

1.

Screen at power-ON

     The monitor display appears.

Display

Operation

3.

Press        to choose the parameter 

     setting mode.

4.

Pr. 7) appears.

7.

Press        to set.

PU indicator is lit.

2.

Press         to choose the PU operation

     mode.

· Press        to show the setting again.

· Press        twice to show the next parameter.

· By turning        , you can read another parameter.

The initial value
 differs according
 to the capacity.

5.

Press        to read the currently set value.

     "      "(initial value) appears.

6.

Turn        to change it to the set 

     value "        ".

The parameter 
number read
 previously appears.