Справочник Пользователя для Mitsubishi Electronics FR-F740P
61
Operation panel (FR-DU07)
4
4.1.2
Basic operation (factory setting)
At power-ON (External operation mode)
PU operation mode
(output frequency monitor)
Parameter setting mode
PU Jog operation mode
Output current monitor
Output voltage monitor
Displays the present
setting
setting
Value change
Value change
Parameter write is completed!!
Parameter and a setting value
flicker alternately.
flicker alternately.
Parameter clear
All parameter
clear
Fault clear
Parameter copy
(Example)
(Example)
Frequency setting has been
written and completed!!
written and completed!!
and frequency flicker.
[Operation for displaying faults history]
The past eight faults can be displayed.
(The latest fault is ended by ".".)
When no fault history exists, is displayed.
Operation mode switchover
Parameter setting
Faults history
Monitor/frequency setting
Initial value change list
IPM parameter
initialization
Automatic parameter
setting
While a fault is displayed:
The display shifts as follows by pressing : Output frequency at the fault
Output current Output voltage Energization time.
(After Energization time, it goes back to a fault display.)
Pressing the setting dial shows the fault history number.
(Refer to page 304)
(Refer to page 63)