Справочник Пользователя для Dakota Digital CMX

  CMX High Performance Material & Coating Thickness Gauge 

61 

5)  Press the UP and DOWN arrow keys to scroll the highlighted value. 

6)  Press the LEFT and RIGHT arrow keys to scroll the digit locations. 

7)  Repeat steps 5 & 6 until the B-Start value  is correctly displayed. 

8)  Press the OK key to set the B-Start value and return to the menu screen, or 

ESC to cancel entering the B-Start. 

9)  Finally, press the MEAS key to return to the measurement screen and begin 

taking readings. 

Once again, just to reiterate, B-DEPTH is the overall viewable thickness range being 
tested.  This should be set to a value slightly larger then the expected maximum 
range being measured.  The procedures to adjust the overall thickness range viewed 
(B-DEPTH) are outlined below: 

 

1)  Press the MENU key once to activate the menu items tab.  Press the MENU 

key multiple times to tab right, and the ESC key multiple times to tab left, 

until the DISP menu is highlighted and displaying the submenu items.