Справочник Пользователя для Cyclades 2.3.0
1: Introduction
6
AlterPath Console Server User Manual
•
Telnet/SSH over a network
You can configure ACS by using any of the following user interfaces:
•
Web Browser
•
VI Editor
•
Wizard
•
Command Line Interface (CLI)
With the ACS set up as a Console Access Server, you can access a server
connected to the ACS through the server’s serial console port from a
workstation on the LAN or WAN.
connected to the ACS through the server’s serial console port from a
workstation on the LAN or WAN.
There is no authentication by default; you can configure the system for
authentication to be performed by a Radius server, a TacacsPlus server, or
even by a local database. You can use either Telnet or ssh (a secure shell
session).
authentication to be performed by a Radius server, a TacacsPlus server, or
even by a local database. You can use either Telnet or ssh (a secure shell
session).
Product Models and Components
There are two models of the ACS based on the type of power supply:
•
ACS with a dual power supply and two PCMCIA slots
•
ACS with a single power supply and two PCMCIA slots.
There are six models of the ACS based on the number of serial ports:
•
•
ACS48
•
ACS32
•
ACS16
•
ACS8
•
ACS4
•
ACS1