Справочник Пользователя для Chauvet Wash LED 150

Скачать
Страница из 52
Intimidator™ Wash LED 150 QRG 
EN 
Page 2 of 52 
About This 
Guide 
The Intimidator™ Wash LED 150 Quick Reference Guide (QRG) has basic 
product information such as mounting, menu options, and DMX values. 
Download the User Manual from 
www.chauvetlighting.com
 for more details. 
Disclaimer 
The information and specifications contained in this QRG are subject to change 
without notice. 
Safety Notes
 
These Safety Notes include important safety information about installation, use, 
and maintenance. 
 
  This product is not intended for permanent installation. 
  ONLY connect this product to a grounded and protected circuit. 
  Always disconnect from power before cleaning or replacing the fuse. 
  DO NOT look at the light source when the product is on. 
  Make sure the power cord is not crimped or damaged. 
  Never disconnect this product from power cord by pulling or tugging 
on the cord. 
  When mounting this product overhead, use a safety cable. 
  DO NOT allow flammable materials close to the unit while operating. 
  DO NOT touch this product when it is operating because it may be hot. 
 
  The voltage of the outlet to which you are connecting this product must 
be within the range stated on the decal or rear panel of the product. 
  This product is for indoor use only! (IP20) To prevent risk of fire or 
shock, do not expose this product to rain or moisture. 
  Always mount this product in a location with adequate ventilation, at 
least 20 in (50 cm) from adjacent surfaces.  
  Be sure that no ventilation slots on the unit’s housing are blocked. 
  Never connect this product to a dimmer or rheostat. 
  Replace the fuse with the same type and rating. 
  ONLY use the hanging/mounting bracket or the handles to carry this 
product. 
  The maximum ambient temperature is 104° F (40° C). Do not operate 
this product at higher temperatures.  
  In the event of a serious operating problem, stop using immediately.  
  DO NOT open this product. It contains no user-serviceable parts. 
Contact 
Outside the U.S., United Kingdom, or Ireland, contact your distributor to request 
support or return a product. Visit 
www.chauvetlighting.com
  for contact 
information. 
What Is 
Included 
  Intimidator™ Wash LED 150  
  Power Cord 
  Warranty Card 
  Quick Reference Guide 
To Begin 
Unpack your Intimidator™ Wash LED 150 and make sure you have received all 
parts in good condition. If the box or contents appear damaged, notify the carrier 
immediately, not CHAUVET®.