Справочник Пользователя для Kenwood TK-3230

This transceiver has been designed to give you the most out of 

your battery power.  The battery saver function decreases the 

amount of power used when a signal is not being received and 

no operations are being performed.
While using the transceiver, battery saver will automatically 

switch ON after 5 seconds have elapsed with no operations or 

received calls.  Operating the transceiver or receiving a call will 

switch this feature OFF until 5 seconds of non-operation occurs 

again.
To turn this function on or off:
1

  With the transceiver power OFF, press and hold the MENU 

key while turning the transceiver power ON (for 1 second).

  Press the   or   key to select “   ”.

  Press the MENU key then press   or   to select “ 

 ” 

(battery saver on) or “ 

 ” (battery saver off).

  Press the MENU key to exit the selection.

  Press the PTT, MON, or CAL key to exit Setting Mode.

  While the Battery Saver is operating, the LED may flash 

green when receiving a QT/DQT signal which does not match 

the QT/DQT tone/code set up in your transceiver.