Справочник Пользователя для Majestic Appliances ODGSR36A

14

It is important to keep the burner and the burner 
compartment clean. At least once per year the logs 
should be removed and the burner compartment 
vacuumed and wiped out. Remove and replace the logs 
as per the instructions in this manual.
Always handle the logs with care as they are fragile 
and may also be hot if the fireplace has been in  
use.

There are three methods of cleaning the polished stain-
less steel of your outdoor fireplace;
1.  Warm, soapy water - to loosen any dirt film
2.  Glass cleaner with ammonia
3.  Stainless steel cleaner available at hardware stores
Regardless of which method is used, remember that 
anything with too much abrasive may dull the finish.  

The burner and control system consists of:

•

  main burner 

• 

gas orifice

• 

pilot burner

• 

thermopile

• 

combination millivolt gas valve

Most of these components may require only an occa-
sional checkup and cleaning and some may require ad-
justment. If repair is necessary, it should be performed 
by a qualified technician.
In order to properly clean the burner and pilot assembly, 
turn off the gas to the unit, remove logs exposing the 
burner and pilot assembly. Clean all foreign materials 
from the top of the burner. Check to make sure that 
burner parts are clean. Visually inspect pilot. Brush or 
blow away any dust or lint accumulation If pilot orifice is 
plugged, disassembly may be required to remove any 
foreign material from the orifice or tubing.
To obtain proper operation, it is imperative that the pilot 
and burner's flame characteristics are steady, not lifting 
or floating.
Typically, the top 3/8" or 1/2" of the thermopile should 
be engulfed in the pilot flame. (Fig. 16)
To adjust pilot burner, turn pilot screw marked "pilot" for 
proper flame size.
The air shutter is set at factory no adjustment should be 
necessary.