Справочник Пользователя для Meco 3340

• A standard Phillips screwdriver
• Hammer
• 3/8 inch open end wrench or pliers.

• Remove all parts and lay them out on a smooth, 

clean surface. Make sure you have all of the parts 
listed in the Parts List.

• Read manual instructions and warnings before 

assembly and use.

• The extra holes in the side of the bowl are for 

mounting accessories (side tables, etc.).

• Do not throw away any of the packaging until 

you have located all the parts.

Note: the Wheel Leg has
hole at bottom of each leg
and is shorter than Front Leg