Справочник Пользователя для 3com WX4400 3CRWX440095A
80
C
HAPTER
4: P
ORT
C
OMMANDS
Examples — The following command displays information for all ports
on a WX1200 switch:
on a WX1200 switch:
WX1200# display port status
Port Name
Admin Oper
Config
Actual
Type
Media
===============================================================================
1 1 up up auto 100/full network 10/100BaseTx
2
2
up up auto 100/full ap 10/100BaseTx
3 3
up up auto 100/full network 10/100BaseTx
4 4 up down auto network 10/100BaseTx
5 5 up down auto network 10/100BaseTx
6 6 up down auto network 10/100BaseTx
7 7 up down auto network 10/100BaseTx
8 8 up down auto network 10/100BaseTx
Table 13 describes the fields in this display.
Table 13 Output for display port status
Field
Description
Port
Port number.
Name
Port name. If the port does not have a name, the
port number is listed.
port number is listed.
Admin
Administrative status of the port:
up — The port is enabled.
down — The port is disabled.
Oper
Operational status of the port:
up — The port is operational.
down — The port is not operational.
Config
Port speed configured on the port:
10 — 10 Mbps.
100 — 100 Mbps.
1000 — 1000 Mbps.
auto — The port sets its own speed.
Actual
Speed and operating mode in effect on the port.
Type
Port type:
ap — MAP access point port
network — Network port
wa — Wired authentication port