Справочник Пользователя для Intel PCI
Software Developer’s Manual
237
Register Descriptions
Table 13-13. 82544GC/EI GPI to SDP Bit Mapping
SPD_BYPS
15
0
Speed Select Bypass
When set to 1b, all speed detection mechanisms are bypassed,
and the Ethernet controller is immediately set to the speed
indicated by CTRL.SPEED. This might be used to override the
hardware clock switching circuitry and give full control to
software. SPD_BYPS differs from the CTRL.FRCSPD function
in that FRCSPD uses the internal clock switching circuitry rather
than an immediate forcing function of the speed settings, as
does SPD_BYPS.
When set to 1b, all speed detection mechanisms are bypassed,
and the Ethernet controller is immediately set to the speed
indicated by CTRL.SPEED. This might be used to override the
hardware clock switching circuitry and give full control to
software. SPD_BYPS differs from the CTRL.FRCSPD function
in that FRCSPD uses the internal clock switching circuitry rather
than an immediate forcing function of the speed settings, as
does SPD_BYPS.
IPS1
16
0
Invert Power State Bit 1
Inverts the polarity of bit 1 of the PWR_STATE signal when set
to 1b.
Configurable through the EEPROM.
Inverts the polarity of bit 1 of the PWR_STATE signal when set
to 1b.
Configurable through the EEPROM.
RO-DIS
17
0
Relaxed Ordering Disabled
When set to 1b, the Ethernet controller does not request any
relaxed ordering transactions in PCI-X mode regardless of the
state of bit 1 in the PCI-X command register. When this bit is
clear and bit 1 of the PCI-X command register is set, the
Ethernet controller requests relaxed ordering transactions as
described.
When set to 1b, the Ethernet controller does not request any
relaxed ordering transactions in PCI-X mode regardless of the
state of bit 1 in the PCI-X command register. When this bit is
clear and bit 1 of the PCI-X command register is set, the
Ethernet controller requests relaxed ordering transactions as
described.
Reserved
31:18
0
Reserved
Should be written with 0b to ensure future compatibility.
Reads as 0b.
Should be written with 0b to ensure future compatibility.
Reads as 0b.
Field
Bit(s)
Initial
Value
Value
Description
B_SDP
CTRL_EXT
(SWDPINHI)
CTRL_EXT
(GPI_EN)
ICR
(GPI)
7
7
3
14
6
6
2
13
5
Reserved
Reserved
Reserved
4
4
0
11