Справочник Пользователя для Mitsubishi Electronics 738 Series

838 Series
The TV’s built-in speaker array can be set up to reflect 
sound off the room walls to create a surround sound effect.

Center the seating area in front of the TV and at 

•

least six feet away.
Arrangements that give good results:

•

If the room is an odd shape, locate the TV to take 

•

best advantage of wall reflections.

Avoid locations that may distort sound reflections.

•

To hear digital surround sound, the TV must be con-
nected to a digital surround sound source.  The surround 
sound source can be on an HDMI input or the 

ANT input 

(for some digital broadcasts).  Other stereo connections 
will provide Dolby Pro Logic surround sound.

Auto setup uses the included calibration micro-
phone.  For manual setup, see the full owner’s guide at 
www.mitsubishi-tv.com.

Power on the TV and external subwoofer, if any.

Plug the microphone cable into the TV’s 

INPUT 3 

left audio jack.

AUDIO

L

R

AUDIO

L

Place the microphone as described in the guide-

lines.
Press 

MENU and go to Sound > AutoSP.

Highlight 

START and press ENTER.

Quietly exit the room right away.  The calibration 

sequence may be loud.  Wait for completion of setup 
before returning to the room.
Play some sample audio material to check the 

sound quality.

Note:  Do not perform manual adjustments after run-

ning auto setup as doing so will delete all auto-
setup results.

Store the microphone out of direct sunlight and 

away from heat.

Be sure the 

height of the 

microphone is 

within three feet 

of the speaker 

height.

Center the micro-

phone in front of 

the TV.

Set the microphone 

on a level surface at 

ear height at least 

six feet from the TV.  

Use a seat backrest 

or tripod so as to 

pick up sound from 

all directions.

Maximum height above speakers