Справочник Пользователя для Mitsubishi Electronics 838 SERIES

If the picture shape 
seems incorrect, use 
the 

FORMAT key to 

change the picture 
shape.

Press 

FORMAT to cycle through the 

picture shapes available for the 
signal.

The last-used format for a signal 
type will be recalled on the input.
Note:  Also check the aspect 
ratio feature on your cable box or 
satellite receiver as this may be 
altering the picture.

PerfectColor™/ 
PerfecTint™ 
Reset (838 
Series)
(for the single 
input currently 
being watched)

When the color 
intensities seem out 
of balance, use the 
PerfectColor/PerfecTint 
reset to reset the color 
balances to the original 
factory settings.
Both PerfectColor and 
PerfecTint are reset at 
the same time.

While viewing the input to be 

reset, press 

MENU and go to 

Picture > Perfect.
Press 

ENTER to display the 

PerfectColor adjustment screen.
Press 

CANCEL to reset the colors.

All PerfectColor/PerfecTint 
sliders are reset to the original 
center position.  The PefectColor/
PerfecTint settings for other 
inputs remain unchanged.

A/V Memory 
Reset
(for the single 
current input)

When audio and/
or video settings for 
a single input seem 
incorrect, use A/V 
Memory Reset to 
return the input to 
the original factory 
settings.

While viewing the input to reset, 

press 

MENU and go to Picture > 

Reset.
Press 

ENTER to highlight Reset.

Press 

ENTER again to reset.

All Audio and Video settings for 
the individual input are reset 
except for the global settings 
for audio Balance, Listen To, 
Language, Video Mute, Smooth 
120.

You can resolve many common TV problems using the 
reset functions described in the following table.  .

IMPORTANT
Before you change sound or picture settings:  If 
picture or sound settings seem wrong for a broadcast 
channel (a channel from the 

ANT input, a cable box, 

or satellite receiver), first check other channels from 
the same input before changing settings.  If most other 
channels from the same input seem correct, there is 
likely a problem with the broadcast rather than with the 
TV.  Use care in this case, as changes you make to fix 
problems on individual channels also affect all other 
channels on the same input.

Service
If you are unable to correct a problem with your TV, 
consult your Mitsubishi dealer or Mitsubishi Con-
sumer Relations at (800) 332-2119.

•  DO NOT adjust any controls other than those

described in this Owner’s Guide.

•  DO NOT remove the protective back cover of

your TV.

•  To order replacement or additional remote con-

trols or lamp cartridges, visit our website at www.
mitsuparts.com or call (800) 553-7278.

•  For questions:

  Call Consumer Relations at 800-332-2119.
  E-mail:  MDEAservice@mdea.com
  Website:  www.mitsubishi-tv.com

Important
All lamps replaced under warranty must be returned 
to Mitsubishi where they will be inspected to verify 
failure defects.