Справочник Пользователя для Pelco CM9760-CXTA
20
Pelco Manual C539M-A (12/01)
3.3.2 CM9760-KBD DIRECT MODE
Consult the required manuals for setting up direct mode operation. The KBD manual
(C540M) is the most important. In particular, see section
(C540M) is the most important. In particular, see section
3.2.7 Direct Camera
Control/Serial Port Speeds
in the KBD manual.
3.3.3 MPT9500 TRANSMITTER/CONTROLLER
You must be in RS-485 mode (as shown on the MPT9500 keyboard display) in order to
operate the MPT9500 in D protocol, simplex mode. The MPT9500 does not, (by default),
come up in RS-485 mode when it is powered on. You must manually select it via the key-
board manual. Consult the manual for further information regarding operation and control.
operate the MPT9500 in D protocol, simplex mode. The MPT9500 does not, (by default),
come up in RS-485 mode when it is powered on. You must manually select it via the key-
board manual. Consult the manual for further information regarding operation and control.
3.3.4 DX7000 DIGITAL VIDEO RECORDER
Consult the appropriate manuals. The DX7000 has its own software management program
for configuring the parameters of any device connected to it as well as a host of other op-
tions that are not covered here.
for configuring the parameters of any device connected to it as well as a host of other op-
tions that are not covered here.
Figure 18. CAMERA Files Example for the CXTA
NOTE:
When programming
the 9760 KBD in direct mode,
logical numbers must be
assigned to any attached
cameras (see the
logical numbers must be
assigned to any attached
cameras (see the
Keyboard
Menu Programming
portion
of section 3.2.7 in the 9760
keyboard manual – C540MA).
keyboard manual – C540MA).