Инструкция для Sweex 5 Port Gigabit Switch SW101

2

Adding 5 ports to the network - connects 5 users, such as PCs, print servers and routers, with the network. Can simply be looped to several HUBS or
switches.
Store and forward switching - offers the possibility to filter all existing error packets, even when the network load is very high. 
Each port can be used as Uplink port - to expand the network you can use an UTP cable.

• Complies with the IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet and IEEE 802.3ab Gigabit Ethernet standard (‘Gigabit over copper’)
• All ports support Auto-Negotiation and Auto-MDI/MDIX functions 
• Supports flow control: Back pressure for Half-duplex and IEEE 802.3x for Full-duplex mode 

• Standard: IEEE802.3 10BaseT, IEEE802.3u 100BaseTX and IEEE802.3ab 1000BaseT ‘copper over Ethernet’
• Number of ports: 5 10/100/1000Mbps auto-sensing Fast Ethernet/Gigabit Ethernet ports
• Media Interface: 5 x RJ-45
• Forwarding Method: Store-and-Forward
• MAC Address: 8K
• Buffer memory: 256KBytes
• Operating temperature: 50~131(10C~55C)
• Air humidity: 10~95% 
• FCC Class A, CE, C-Tick

• LNK/ACT: Link / Activity
• FULL/COL: Full duplex / Collision
• Speed: 10/100/1000Mbps