Справочник Пользователя для NEC l102w

12

English ...

1.............................................................................................Power cord (supplied)

2......................................................................................................................SD Card

3...............................................................................................................HDMI cable

4........................................................................ Computer cable (VGA) (supplied)

5...........................................................................................................Audio in cable

6...................................................................................................................USB cable

7........................................................................................................ Audio out cable

8................................................................................................ USB memory device

To the wall outlet



Make sure that the 

power plug is fully 

inserted into both the 

projector AC inlet and 

the wall outlet.

When Viewing a DVI Digital Signal

•  Use a DVI-to-HDMI cable compliant with DDWG (Digital Display Working Group) DVI (Digital Visual 

Interface) revision 1.0 standard. The cable should be within 197”/5 m long.

•  Turn off the projector and the PC before connecting the DVI-to-HDMI cable.

•  To project a DVI digital signal: Connect the cables, turn the projector on, then select the HDMI input. 

Finally, turn on your PC. 

Failure to do so may not activate the digital output of the graphics card resulting in no picture being dis-

played. Should this happen, restart your PC.

•  Some graphics cards have both analog RGB (15-pin D-Sub) and DVI (or DFP) outputs. Use of the 15-pin 

D-Sub connector may result in no picture being displayed from the digital output of the graphics card.

•  Do not disconnect the DVI-to-HDMI cable while the projector is running. 

Audio Output