Справочник Пользователя для GTO GP-SW050

Check to make sure the safety edges, photoelectric beams, warning signs, and pedestrian gate (if necessary) are

installed (see pages 5-6) before fastening the housing to the operator.

The installation is complete. Test the operator, accessories, and safety devices for correct function. Read and

fill out the INSTALLATION CHECKLIST on the back cover of this manual.  

1. 

Lower the operator housing into  

 

 

position over the operator.

with 5mm key

2. 

Pull sides out slightly so that the  

 

 

 

housing sits into place properly over the base.

3. 

Fasten the housing to the operator with

(2) Washers and (2) Allen Bolts.