Техническая Спецификация для Intel Xeon Wolfdale E3210 P4X-UPE3210-316-6M1333
Модели
P4X-UPE3210-316-6M1333
Datasheet
139
DRAM Controller Registers (D0:F0)
5.2.51
TSMICMD—Thermal SMI Command
B/D/F/Type:
0/0/0/MCHBAR
Address Offset: CF1h
Default Value:
00h
Access:
RO, RW
Size:
8 bits
This register selects specific errors to generate a SMI DMI special cycle, as enabled by
the Device 0 SMI Error Command Register [SMI on MCH Thermal Sensor Trip]. The SMI
must not be enabled at the same time as the SERR/SCI for the thermal sensor event.
All bits in this register are reset to their defaults by PLTRST#.
Bit
Access
Default
Value
Description
7:3
RO
00h
Reserved
2
RW
0b
SMI on MCH Catastrophic Thermal Sensor Trip (SMGCTST):
1 = Does not mask the generation of an SMI DMI special cycle on a catastrophic
1 = Does not mask the generation of an SMI DMI special cycle on a catastrophic
thermal sensor trip.
0 = Disable reporting of this condition via SMI messaging.
1
RW
0b
SMI on MCH Hot Thermal Sensor Trip (SMGHTST):
1 = Does not mask the generation of an SMI DMI special cycle on a Hot thermal
1 = Does not mask the generation of an SMI DMI special cycle on a Hot thermal
sensor trip.
0 = Disable reporting of this condition via SMI messaging.
0
RW
0b
SMI on MCH Aux Thermal Sensor Trip (SMGATST):
1 = Does not mask the generation of an SMI DMI special cycle on an Auxiliary
1 = Does not mask the generation of an SMI DMI special cycle on an Auxiliary
thermal sensor trip.
0 = Disable reporting of this condition via SMI messaging.