Справочник Пользователя для Tektronix AM700
HCOPy Subsystem
3–72
AM700 Audio Measurement Set Programmer Manual
HCOPy[:IMMediate]
Usage:
Causes the currently visible screen to be printed to the currently-selected
hardcopy device, using the currently-selected hardcopy format.
hardcopy device, using the currently-selected hardcopy format.
Query:
Event only, no query.
HCOPy:ABORT
Usage:
Aborts any printing currently in progress, and discards any print jobs which are
pending. Intermediate files are sent to a spool directory before being spooled.
The spool directory can hold 5 to 10 hardcopy intermediate files. Once a file is
spooled to the directory, the application which created the screen dump can go
back to making measurements. Hard copy spooling occurs in the background.
pending. Intermediate files are sent to a spool directory before being spooled.
The spool directory can hold 5 to 10 hardcopy intermediate files. Once a file is
spooled to the directory, the application which created the screen dump can go
back to making measurements. Hard copy spooling occurs in the background.
Query:
Event only, no query.
HCOPy:DESTination <data handle>
Usage:
This command allows the destination ”device” for hardcopy output to be set.
The following data handles are legal:
Parameters:
SYSTem:COMMunicate:SERial1
SYSTem:COMMunicate:SERial2
SYSTem:COMMunicate:GPIB
MMEM
for file
for None
The first two
<data_handles>
direct hardcopy output to the COM1 or COM2
serial ports on the back of the AM700. The third one directs hardcopy output to the
GPIB in talk-only mode, and the last one directs the hardcopy to a file named by the
GPIB in talk-only mode, and the last one directs the hardcopy to a file named by the
MMEM:NAME
filename
command in NVRAM. The GPIB port will not work
for hardcopy output if the GPIB is currently being used for remote control.
Example:
hcop:dest
syst:comm:ser1