Справочник Пользователя для Rheem Electric Domestic Water Heater
CONNECTIONS – ELECTRICAL
ASSEMBLY OF ADJUSTER MECHANISM ON OPTIMA MODEL
When the front cover has been removed, reassemble as follows:
When the front cover has been removed, reassemble as follows:
•
Remove the knob from the front
cover by depressing the locking
tabs on the inside of the front cover.
cover by depressing the locking
tabs on the inside of the front cover.
•
Turn the thermostat to the lowest
temperature (refer to
temperature (refer to
on page 5).
28
•
Fit the front cover.
•
Insert the connector shaft through
the hole into the thermostat adaptor
slots.
the hole into the thermostat adaptor
slots.
•
Align the knob slots over the ‘T’ drive on the connector shaft, with the dial at
the lowest setting – a firm push with the hand on the knob front face will
engage the locking tabs.
the lowest setting – a firm push with the hand on the knob front face will
engage the locking tabs.
WIRING DIAGRAM TWIN ELEMENT ELECTRIC WATER HEATERS
NON-SIMULTANEOUS OPERATION OFF-PEAK CONNECTION
Electrical Circuit for Twin Element Models – Robertshaw “EWT” Thermostats