Справочник Пользователя для Philips DVP3124/78

9

The underlined option is the factory default setting.

 

Press  to go back to previous menu item. Press SETUP to exit the menu item.

This option allows you to set the stereo 
analog output of your DVD player.

A

  In ‘Audio Setup Page’, press   to 

select { Downmix }, then press .

{ Stereo }
Select this option when output delivers 
sound from only the two front speakers.

  { LT/RT }

Select this option if your DVD player is 
connected to a Dolby Pro Logic decoder. 

B

  Use   to select a setting and press 

OK to confirm.

The options included in Digital Audio are: 
{Digital Output} and {LPCM Output}.

A

  In ‘Audio Setup Page’, press   to 

select { Digital Audio Setup }, then 
press .

B

  Press   to select an item, then press 

 to access.

C

  Use   to select a setting and press 

OK to confirm.

Set the Digital Output according to your 
optional audio equipment connection.

  { All }

Select this if the connected device has a 
built-in multichannel decoder that 
supports one of the multichannel audio 
format (Dolby Digital, MPEG-).

  { PCM Only }

Select this if the connected device is not 
capable of decoding multichannel audio. 
The DVD player will convert the Dolby 
Digital and MPEG- multichannel signals 
to PCM (Pulse Code Modulation).

  { SPDIF Off }

To deactivate the digital audio output. 
For example, if you use the AUDIO OUT 
sockets to connect to a TV or stereo 
system.

If you connect the DVD player to a PCM 
compatible receiver via the digital 
terminals, such as coaxial or optical etc, 
you may need to adjust ‘LPCM Output’.

  { 48K }

Playback a disc recorded at the sampling 
rate of 48k�z.

{ 96K }
Playback a disc recorded at the sampling 
rate of 96k�z. This rate can only be 
achieved in Stereo-Classic (Flat) mode.

01-39_dvp3120_3124_55_eng2.indd   29

2007-12-12   2:36:22 PM