Справочник Пользователя для Philips MCD716/12
34
English
Radio Reception
Tuning to radio stations
1
Press ECO POWER/STANDBY-ON
y to
switch on the last selected source.
2
Press SOURCE (TUNER on the remote
control) to select TUNER (FM) mode.
control) to select TUNER (FM) mode.
3
Press and hold
¡ / ™ (or 2/3 on the remote
control) until the frequency indication starts to
change, then release.
change, then release.
➜
The system automatically tunes to the next
strong radio station.
●
To tune to a weak station, press
¡ / ™ (or 2/3
on the remote control) briefly and repeatedly
until an optimal reception is found.
until an optimal reception is found.
4
Repeat Step 3 if necessary until you find the
desired radio station.
desired radio station.
Presetting radio stations
You can preset up to 40 stations regardless of
the reception.
the reception.
Automatic progamming
●
Press PROGRAM on the remote for more
than two seconds to activate programming.
than two seconds to activate programming.
➜
All available stations are programmed.
Manual progamming
1
Tune to your desired radio station (refer to
“Tuning to radio stations”).
“Tuning to radio stations”).
2
Press PROGRAM on the remote.
➜
”
PROG” icon flashes.
3
Press PRESET+ or PRESET-/
9 (or ¡ / ™ on
the remote control) to select the desired preset
number.
number.
➜
If “
PROG” icon goes off before you select the
desired preset number, press PROGRAM on
the remote.
the remote.
4
Press PROGRAM on the remote again to
store the radio station.
store the radio station.
●
Repeat steps 1-4 to store other radio stations.
Other Functions
Listening to preset radio stations
●
In tuner mode, press PRESET+ or PRESET-/
9 (or ¡ / ™ on the remote control) to select
the desired preset number.
9 (or ¡ / ™ on the remote control) to select
the desired preset number.
➜
The preset number, radio frequency, and
waveband are displayed.
RDS
Radio Data System is a service that allows
FM stations to show additional information. If
you are receiving a RDS station,
FM stations to show additional information. If
you are receiving a RDS station,
and the
station name are displayed.
When automatic programming is used, RDS
stations will be programmed first.
When automatic programming is used, RDS
stations will be programmed first.
Scrolling through different RDS
information
information
●
Press RDS briefly and repeatedly to scroll
through the following information (if available):
– Station name
– Radio text messages
– Frequency
through the following information (if available):
– Station name
– Radio text messages
– Frequency
Setting the RDS clock
Some RDS radio station may be transmitting a
real clock time at an interval of every minute. It
is possible to set the clock by using a time signal
which is broadcast together with the RDS signal.
real clock time at an interval of every minute. It
is possible to set the clock by using a time signal
which is broadcast together with the RDS signal.
1
Tuned to an RDS station from FM band (refer to
“Tuning to radio stations”).
“Tuning to radio stations”).
2
Press and hold RDS for more than two seconds.
3
Press RDS again.
➜
"
SEARCH TM" is displayed.
➜
When RDS time is read, “RDS” and RDS time
time value are displayed and the current time
will be stored.
will be stored.
Note:
– Some RDS radio station may be transmitting a
real time clock at a minute interval. The accuracy
of the transmitted time depends on the
transmitting RDS radio station.
– Some RDS radio station may be transmitting a
real time clock at a minute interval. The accuracy
of the transmitted time depends on the
transmitting RDS radio station.
pg 001-042_MCD716_12_Eng
2010.6.23, 17:11
34