Справочник Пользователя для Philips PPX4350/INT
8
Philips · PPX 4350
3 Initial Operation
Setting up the Device
A tripod accessory is available to elevate the device, see
the paragraph “Accessories” page 23.
the paragraph “Accessories” page 23.
Connect Power Supply /
Charge Battery
Charge Battery
1 Connect the USB plug to a computer, to charge the
battery.
Alternatively you may connect the USB plug to the
power adapter (not included), we recommend using
the accessory PPA6200. Charge time is faster for to
charge the battery.
power adapter (not included), we recommend using
the accessory PPA6200. Charge time is faster for to
charge the battery.
Initial Installation
1 Switch the device on using the on/off switch on the
side.
2 Turn the device towards a suitable projection sur-
face or wall. Note that the distance to the projection
surface must be a minimum of 0.3
surface must be a minimum of 0.3
meters and a max-
imum of 2.1 meters. Make sure the projector is in a
secure position.
secure position.
3 Use the focus wheel on the top to adjust the image
sharpness.
4 Select the desired menu language using
/.
5 Confirm with
à.
CAUTION!
Mains Voltage at the Site of Installation!
Check whether the mains voltage of the
power supply matches the mains voltage avail-
able at the setup location.
power supply matches the mains voltage avail-
able at the setup location.
Notice
The Main Menu Appears Instead of
the Language Selection
the Language Selection
The device has already been installed. In
order to change the menu language, pro-
ceed as follows:
order to change the menu language, pro-
ceed as follows:
1 Use the navigation keys to select Extras.
2 Confirm with
à.
3 Select with
/ Language/Lan-
guage.
4 Confirm with
à.
5 Select the desired language with
/.
6 Confirm with
à.
7 Exit with
.
PPX4350_UM_EN_253624544.book Page 8 Jeudi, 29. janvier 2015 11:35 11