Справочник Пользователя для Philips LFF6080/GBB

- 37 -

For some long distance calls 
(satellite), the on-line echo may 
disturb the call.

Choice between transmission 
speed displayed or number of the 
page in progress.

Choosing the printer standby 
delay: the printer will switch to 
standby after a delay (in minutes) 
of NON-operation or during the 
period of time of your choice.

Note: you can also access this 
parameter by pressing the 

 key from the idle screen.

If this parameter is on, all 
documents received by your fax 
will include the subscriber’s header 
with his/her name, number (if 
available) fax print date and the 
page number.

Transmission speed for incoming 
documents.

 

For a quality telephone line 
(compatible, no echo), 
communications occur at 
maximum speed.

However, it may be necessary to 
restrict the transmission speed for 
some calls.

Number of rings to automatically 
start your machine.

The Discard Size parameter only 
defines the printing of received 
faxes. The number of lines of a 
document can be too high for the 
printing paper format. This 
parameter defines the threshold 
beyond which the extra lines are 
printed on a second page. Below 
this threshold, extras lines are 
deleted.

If you choose ON, the threshold is 
set on 3 centimeters.

If you choose OFF, the threshold is 
set on 1 centimeter.

This parameter helps correct the 
calls made on disturbed telephone 
lines. It is used when the lines are 
weak or too noisy. Transmission 
times may be longer.

This parameter lets you choose 
between a complex impedance 
and a 600 Ohm impedance, 
depending on the telephone 
network your terminal is connected 
to.

This parameter lets you 
automatically register the Internet 
address of your subscribers fax 
during a call (if available).

When the fax machine receives an 
e-mail with an attachment and 
cannot open it, it erases the 
message from the ISP MBX, prints 
and transmits with a notice of 
uncomprehension to the message 
sender.

At E-mail reception, the fax does 
not destroy the MBX message, it 
prints a notice of uncomprehension 
asking you to recuperate this 
message with your computer 
equipment.

This parameter is useful only if you 
have PC equipment. The memory 
capacity is limited, you need to 
empty your MBX or else new 
messages may not be received.

Editing ON / OFF and printing the 
received Internet documents.

Default format of document sent 
on the Internet:

PDF : monochrome or colour

IMAGE : monochrome (TIFF) or 
colour (JPEG)

To define the communication 
speed of the peripheral units in 
relation to the implemented Local 
Area Network (LAN).

Makes printing lighter to save toner 
cartridge ink.

Starts the printing of the log list.

This parameter lets you set the 
default PCL font. The possible 
values are included between 5 and 
128 included. The default value is 
0 (Courier).