Справочник Пользователя для Philips DVP3120K/98
English
32
Analog Output
This option allows you to set the stereo
analog output of your DVD player.
analog output of your DVD player.
A
In ‘Audio Setup Page’, press S T to
select { Analog Output }, then press X.
{ Stereo }
Select this option when output delivers
sound from only the two front speakers.
Select this option when output delivers
sound from only the two front speakers.
{
LT/RT }
Select this option if your DVD player is
connected to a Dolby Pro Logic decoder.
connected to a Dolby Pro Logic decoder.
{
V SURR }
Allows the DVD player to use virtual
surround sound effects.
surround sound effects.
B
Use S T to select a setting and press
OK to confi rm.
Digital Audio Setup
The options included in Digital Audio
Setup are: {Digital Output} and {LPCM
Output}.
Setup are: {Digital Output} and {LPCM
Output}.
A
In ‘Audio Setup Page’, press S T to
select { Digital Audio Setup }, then
press X.
press X.
B
Press S T to select an item, then press
X to access.
C
Use S T to select a setting and press
OK to confi rm.
Digital
Output
Set the Digital Output according to your
optional audio equipment connection.
optional audio equipment connection.
{
All }
Select this if the connected device has a
built-in multichannel decoder that
supports one of the multichannel audio
format (Dolby Digital, MPEG-2).
built-in multichannel decoder that
supports one of the multichannel audio
format (Dolby Digital, MPEG-2).
{
PCM Only }
Select this if the connected device is not
capable of decoding multichannel audio.
The DVD player will convert the Dolby
Digital and MPEG-2 multichannel signals
to PCM (Pulse Code Modulation).
capable of decoding multichannel audio.
The DVD player will convert the Dolby
Digital and MPEG-2 multichannel signals
to PCM (Pulse Code Modulation).
{
Off }
To deactivate the digital audio output.
For example, if you use the AUDIO OUT
sockets to connect to a TV or stereo
system.
For example, if you use the AUDIO OUT
sockets to connect to a TV or stereo
system.
LPCM
Output
If you connect the DVD player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM Output’.
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM Output’.
{
48K }
Playback a disc recorded at the sampling
rate of 48kHz.
rate of 48kHz.
{ 96K }
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
Tip:
– Discs are recorded at a certain sampling
rate. The higher the sampling rate, the better
sound quality. LPCM Output can be selected
only when PCM Only is activated.
– Discs are recorded at a certain sampling
rate. The higher the sampling rate, the better
sound quality. LPCM Output can be selected
only when PCM Only is activated.
DVD Menu Options
(continued)
TIPS:
The underlined option is the factory default setting.
Press
W to go back to previous menu item. Press SETUP to exit the menu item.
01-43_dvp3120K_98_eng1.indd 32
01-43_dvp3120K_98_eng1.indd 32
2007-07-25 1:46:59 PM
2007-07-25 1:46:59 PM