Листовка для Epson LQ-630

Unpacking the Printer

Remove the protective materials

Follow the directions on the Notice Sheet to remove the protective materials.

Save all packing and protective materials in case you need to ship the printer in the
future.

Assembling the Printer

1. Make sure the printer is turned off and unplugged.

2. Open the printer cover.

Then, move the print head slightly to the right.

3. Pull the paper bail forward, then flip it towards you, as shown.

4. Remove the ribbon cartridge from the package.

5. Separate the ribbon guide from the cartridge by

pulling the ribbon guide forward.

Caution:

Do not tear off the clear film on the ribbon
guide. Doing so may cause paper jams or
printer malfunctions.

6. Insert the ribbon cartridge into the

printer, then press both sides of the
cartridge firmly to fit the plastic hooks
into the printer slots.

7. Hold the ribbon guide and slide the

protruding parts on both sides into
the slots of the print head until it clicks
in place.

8. Turn the ribbon-tightening knob to

help feed the ribbon into place; it
should not be twisted or creased.

9. Close the paper bail and printer cover.

10.Attach the paper guide.

Connecting the Printer to Your Computer

Connecting the printer

Make sure both the printer and computer are turned off, then connect the interface
into the printer and computer.

Plugging in the Printer

Make sure the printer is turned off, then plug the power cord into a properly grounded
electrical outlet.

printer

paper guide

power cord
It may come attached to the
printer in some countries.

ribbon cartridge

Software CD-ROM

Notice sheet

Setup Guide

24-pin Dot Matrix Printer

Cautions

must be observed

to avoid damage to your
equipment.

Notes

contain important

information and useful tips on
the operation of your printer.

Warnings, Cautions, and Notes

Warnings

must be followed

carefully to avoid bodily injury.

4041761-00
xxx