Справочник Пользователя для Philips CT3508/ABUSA0P2

The phone does not
switch on

Remove and reinstall the
battery (see page 6). Then
charge the phone until the
battery icon has stopped
flashing. Finally, unplug from
the charger and try to switch
the mobile on.

The display shows
BLOCKED when
you switch on

Somebody tried to use your
phone but didn’t know the
PIN code nor the unblocking
code (PUK). Contact your
service provider.

The  

and 

symbols are not
displayed

The network connection is
lost. Either you are in a radio
shadow (in a tunnel or
between tall buildings) or you
are outside the network
coverage area. Try from
another place or contact your
network operator for
assistance/information about
the network.

The display doesn't
respond (or the
display responds
slowly) to key
presses

The display responds more
slowly at very low temperatures.
This is normal and does not
affect the operation of the
phone. Take the phone to a
warmer place and try again. 
In other cases please contact
your phone supplier.

Your phone doesn’t
return to the idle
screen

Press and hold 

c

, or

switch off the phone, check
that the SIM card and the
battery are installed correctly,
and switch it on again.

Your phone doesn’t
display the phone
numbers of incoming
calls

This feature is network and
subscription dependent. If the
network doesn’t send the
caller’s number, the phone will
display 

Call 1

 instead. Contact

your operator for detailed
information on this subject.

You can’t send text
messages

Some networks don’t allow
message exchanges with other
networks. Contact your
operator for detailed
information on this subject.