Справочник Пользователя для Brother MFC 9880
18
Chapter 1
Speaker Volume
You can set the volume of the machine speaker.
1
Press Menu, 1, 3, 3.
2
Press
or
to select your volume setting (OFF, LOW, MED, or HIGH).
3
Press Set when the screen displays your selection.
4
Press Stop/Exit.
PABX and TRANSFER
The machine is initially set to be connected with PSTN (Public Switched Telephone Network) lines.
However, many offices use a central telephone system or Private Automatic Branch Exchange
(PABX). Your fax can be connected to most types of PABX. The recall facility on the machine
supports timed break recall only (TBR), PBXS normally can work with this for gaining access to an
outside line, or for transferring a call to another extension: The feature works when the Tel/R key is
pressed. Press Tel/R to disconnect the line.
However, many offices use a central telephone system or Private Automatic Branch Exchange
(PABX). Your fax can be connected to most types of PABX. The recall facility on the machine
supports timed break recall only (TBR), PBXS normally can work with this for gaining access to an
outside line, or for transferring a call to another extension: The feature works when the Tel/R key is
pressed. Press Tel/R to disconnect the line.
Setting PABX
If the machine is connected to a PABX system, set PBX:ON. If not, set OFF.
1
Press Menu, 1, 4.
2
Press
or
to select ON (or OFF).
3
Press Set when the screen displays your selection.
4
Press Stop/Exit.
You can program an Tel/R key press as part of a number stored in a One Touch
or Speed Dial location. When programming the One Touch or Speed Dial number
(Function menu 2-3-1 or 2-3-2) press Tel/R first (the screen displays “!”), then
enter the telephone number. If you do this, you do not need to press Tel/R each
time before you dial using a One Touch or Speed Dial location. (See Storing
Numbers for Easy Dialling, page 21.)
However, if PBX is set to OFF, you can’t use the One Touch or Speed Dial number
that the Tel/R keypress is programmed into.
or Speed Dial location. When programming the One Touch or Speed Dial number
(Function menu 2-3-1 or 2-3-2) press Tel/R first (the screen displays “!”), then
enter the telephone number. If you do this, you do not need to press Tel/R each
time before you dial using a One Touch or Speed Dial location. (See Storing
Numbers for Easy Dialling, page 21.)
However, if PBX is set to OFF, you can’t use the One Touch or Speed Dial number
that the Tel/R keypress is programmed into.